|
|
|
Prowler 8x8- Component Video Switch w/ Audio & UTP Outputs Kit w/ 8-RX
|
Prowler 8x8
|
|
Zektor- The Prowler 8x8 Component Video Matrix Switch with Analog and Digital Audio with UTP Outputs Bundled with 8-RX
|
Reg.: $6,731.00
Your Price: $6,299.00
Detailed Description
Active non-blocking 8x8 Matrix, 0Hz-450MHz Bandwidth, Full D.C. coupled design. Analog Audio, Digital Audio, Bi-directional conversion between all forms of analog and digital audio. Volume Bass and Treble control of Analog and Digital audio. TCP/IP, RS-232, IR-Jack, IR discrete codes for every function (over 350 discrete codes), 100 programmable presets for simple IR control, Brushed Aluminum.
- Video, Audio and Power sent down a single CAT5/6/7 cable.
-
No power, or ground, needed at the receiver side.
-
Perfect for retrofits where only one CAT5/6/7 cable is pre-installed, but video and audio are both needed at the destination site.
VIDEO:
-
450MHz bandwidth local ouputs, DC coupled inputs and outputs, for the most demanding video applications.
-
150MHz bandwidth CAT5/6/7 outputs, DC coupled for deep blacks and bright whites, and for black and white transitions without loss of sync.
-
Local component video outputs mirror CAT5/6/7 outputs.
-
8 Channels of YPbPr, YCbCr or RGsB video.
-
3 Channels of composite to component video conversion.
-
Full control of Contrast, Brightness, Saturation and Hue on the composite inputs.
-
8 Component video zones which can be switched to any of the 11 input channels.
AUDIO:
-
Volume, Balance, Bass, Treble and 5 Band Equalizer control of analog AND digital audio.
-
Analog audio is automatically converted to digital audio, digital audio is automatically converted to analog audio.
-
Both analog and digital audio is available simultaneously on the outputs.
-
Local stereo analog audio, and S/PDIF audio outputs.
-
Volume range: 0dB to -99.5dB, and full mute, with 0.5dB step resolution.
-
Tone / EQ ranges: +20dB to -20dB, with 0.5dB step resolution.
-
Gain settings (+/-24dB) for each input, seperate gains available for digital and analog.
-
Lip sync delay from 0 to 170ms, per zone and/or per input.
-
8 coax digital inputs and 4 optical digital inputs w/auto conversion to coax for easy integration with cable boxes.
CONTROL:
-
TCP/IP, Bi-directional RS-232 and RS-422, Front panel IR sensor, Rear panel IR jack.
-
TCP/IP and RS-232 / RS-422 share the same protocol. Protocol allows for polled or instant update modes. Polled or instant update modes are settable on a command by command basis.
-
Over 350 discrete IR codes!
For more detailed specs and features click HERE
|
|
|